ISO 26262 IEC61508 Functional Safety (FuSa) Services for Autonomous, Electric Automotive, Industrial, Aerospace and, Defence
ISO 26262, IEC 61508, ISO 25119, SO/PAS 21448, UL4600, ISO 13849, DO 178 based Functional Safety (FuSa) Compliance, Development, Technical, Management, Consulting, Process Development and Training Services for Automotive, Industrial, Aerospace and Defence Systems
Our team of Functional Safety Certified Consultants have partnered with customers across US, Europe and India, to help them achieve ISO 26262 compliance (ASIL A/ ASIL B/ ASIL C/ ASIL D) and IEC81508 compliance (SIL1 / SIL2 / SIL3).
Our expertise is not only limited to automotive domain but we also have executed projects including off-highway vehicles, defence and industrial control applications. Our domain expertise spans- electric vehicle, battery management systems, electric fuse boxes, high power charge controllers, Electronic Power Steering (EPS), Telematics Solutions, Body Control Module, , Powertrain ECU, Advanced Driver Assistance Systems (ADAS), and more.
Functional Safety Compliant Embedded Hardware Development Services
Our functional safety certified hardware design engineers can deliver or work with you on development of safety compliant safety hardware for automotive or industrial product development projects up to ASILD / SIL3 for following work packages:
- FMEDA for Quantitative SPFM, LFM, PMHF, MTTFd, PHF Safety Analysis: Perform quantitative evaluation of the hardware for random single point, latent, multiple, sleeping, dual second faults, hardware fault accumulation to identify suitable diagnostic coverage and safety mechanisms.
- Hardware Safety Requirements specifications: Specify hardware safety requirement specifications by establishing traceability to TSR and capturing attributes of safety mechanisms, safety response time, fault tolerant time interval FTTI, diagnostic coverages from hardware safety analysis.
- Hardware Design Architecture: Design hardware architecture for redundancies(1002, 1002d, 2002 etc), hardware safety requirements, accuracy and environmental conditions and specify hardware software interface specification (HSI)
- Hardware architectural metrics Analysis: Check if the hardware architectural metrics SPFM, LPM, PMHF, PHF, DC, MTTFd satisfy the target safety level related ware design. safety goal violations due to random hardware failures
- Hardware Design using Cadence and Allegro Tool – Mixed signal, Power Electronics, multi-processor and high speed schematics design using Cadence Orcad and multi-layer PCB layout using Allegro with DRCs complying with static analysis safety requirements.
- Dynamic Schematic and PCB Layout Simulations Analysis: Perform simulations at Schematic level (hardware derating analysis, worst case circuit analysis WCCA, PSPICE, LTPSICE) or pcb layout (Signal Integrity, Power Integrity, Thermal analysis) level to validate failure modes, reduce hardware iterations and dynamic requirements analysis as per safety standards.
- Hardware tool and component qualification TCL: of hardware components and tools: Component Qualification Production
- Verification and validation is needed all through the development life cycle to demonstrate that safety in reached, for it we use different Safety Verification and Validation Tools and Techniques. FIT Testing Hardware V&V Gap Analysis & Improvements: Traceability, Static Analysis, Dynamic Analysis, and Test Plans & Coverage.
Sucessful Functional Safety Case Studies : Functional Safety projects in Automotive (ISO 26262) & Industrial (IEC 61508)
ASIL-D / SIL3 End to end Compliance for Electric Power Steering system
We worked European Tier-1 for ISO 26262 / IEC 61508 ASIL-D / SIL3 end to end concept to certification support for their premium passenger car application
VerveTronics Role:
- Support for end to end ISO 26262 ASIL-D | IEC 61508 SIL3 compliance and certification
- Safety/Technical Concept and specifications ,
- Safety Analysis for System (HARA), Hardware(FMEDA), Software(FMEA) and Mechanical (FMEA)
- Safety Compliant Hardware Specifications and Assessment
- Hardware Design and development
- Safety Compliant Software Specifications, Validation and Assessment
- ASIL-D / SIL3 Process Development and Improvements
- Safety Assessment and Certifications
ASIL-B grade DC Power Converter System
We worked with a leading Tier-1 supplier in Europe to develop DC Power Converter System according to ASIL-B rating
VerveTronics Role:
- Safety/Technical Concept and specifications ,
- Safety Analysis for Hardware(FMEDA), Software (FMEA) and Mechanical (FMEA)
- Safety Compliant Hardware Specifications and Assessment
- Safety Compliant Software Specifications and Assessment
- Safety Assessment.
ASIL-C grade Electronics DC Protection System
We worked with a leading Tier-1 supplier in US to develop Electronics DC Protection System according to ASIL-C rating
VerveTronics Role:
- Support for end to end ISO 26262 ASIL-C compliance
- Safety/Technical Concept and specifications ,
- Safety Analysis for Hardware(FMEDA), Software (FMEA) and Mechanical (FMEA)
- Safety Compliant Hardware Specifications and Assessment
- Safety Compliant Software Specifications and Assessment
- ASIL-C / ASPICE Process Development and Improvements
- Safety Assessment
Team
Our team is complemented with ISO 26262 IEC 61508 Functional Safety Certified Systems Engineers, Safety Certified Senior Hardware Design Engineers, Safety Certified Senior Software Design Engineers well as Functional Safety Managers with academics in the field of Electronics and functional safety.
Our consultants have experience developing safety critical electrical/electronic systems in a range of vehicle domains including powertrain, chassis, steering and braking systems, and more recently in hybrid/electric vehicles and Advanced Driver Assistance Systems (ADAS).
We have proven our expertise of our Functional Safety Consultants in Complex ISO 26262 (ASIL D/ ASIL C) Automotive projects and IEC 61508 (SIL 3 / SIL2 ) Industrial Projects.
We care about what we do!